Chrome Car Window Tint

FILM MEASURES: 50CM X 300CM

IMPORTANT:

The film must be separated from its transparent protective layer this is best done with 2 small pieces of scotch/adhesive tape/ stick on both sides of one of the corners of the film and this will reveal its adhesive side, please apply it on your window 

with plenty of soapy water on the glass, then press with the plastic tool (to avoid scratching the film please do not press too hard with the plastic tool or better wrap it in some cloth)

•  SILVER/CHROME REFLECTABLE TINT FILM

            SUPPLIED WITH OUR KITS:            

 -RETRACTABLE BLADE

 -PLASTIC SQUEEGEE

 FITTING INSTRUCTION:

1. Clean window inside and out with soapy water. NO AMMONIA

2. Cut film pattern on outside of glass. LINEAR SHOULD FACE OUTSIDE

3. Trim film to fit on outside of window

4. Spray a light film of water on glass and film

5. Peel film apart from backing on inside of window. Use two pieces of transparent tape to separate film from liner

6. Spray adhesive with soapy water solution

7. Place film on INSIDE of window

8. Spray film with soapy water solution and squeedgee firmly

9. Trim film with new sharp blade, leaving 1/16” gap around edges

10. Spray film with soapy water solution and squeedgee firmly